Key Benefits

  • Increased uptime
  • Higher quality
  • Exceptional technical support

Get top-quality parts fast so you can get back to work

Optimise your equipment and improve your business with our replacement parts for Hitachi® Hydraulic Excavators. We offer a wide range of spare parts that are available for immediate shipment, and we back all our parts with premium customer service.

When it comes it comes to getting value and performance from your equipment, everything from pin & bushing sets to complete undercarriage replacements need to be up to the task. EXCEL™ high-performance parts for Hitachi® Hydraulic Excavators are designed to meet these needs. In many cases, our engineers have gone back to the drawing board, to greatly improve the durability and performance of our parts.


Our spare parts for Hitachi Hydraulic Excavators offering includes the following models:  EX1800™, EX1900™, EX3500/3600™, EX5500/5600™, EX8000™


Component Identification

A - Bucket & bucket cylinder

B - Arm & bucket

C - Front & rear bucket

D - Front bucket & dump cylinder

E - Rear bucket & dump cylinder

F - Mainframe & boom cylinder

G - Arm & arm cylinder

H - Arm & level cylinder

 I - Boom & bucket cylinder

J - Boom & arm


K - Boom & boom cylinder

L - Boom & level cylinder

M - Boom & arm cylinder

N - Mainframe & boom

O - Idler

P - Drive tumbler

Q - Upper roller

R - Lower roller

S - Track shoe

T - Drive shaft

Download the full Identification flyer for Shovel

Download the full Identification flyer for Backhoe

Excavator parts that deliver value and performance

Your equipment is only as good as its parts. When those parts fail, your machinery grinds to a halt. Our spare parts for Hitachi® Hydraulic Excavators extend the duration between maintenance times to keep your excavators productive and effective for longer.

Improved Uptime
Our excavator spare parts offer extreme durability so that you can operate your equipment longer and under even the most extreme conditions. Whether you need a complete undercarriage assembly or a single pin, our parts take you farther before your next maintenance shutdown. When you treat each replacement part like the investment that it is, you will be surprised at how much more time your excavator runs.


Outstanding quality

Many of our competitors use a lower quality metallurgical compounds because they are less expensive to create. We use only high-quality materials and alloys that are designed for their durability because we would rather sell a superior product than pad our profit margins. This same focus on quality also inspires our unique fabrication and manufacturing processes, and we perform a detailed inspection on every part that we ship. Our attention to quality assurance and customer support is reflected by our ISO 9001 certification.


Technical and sales support

We have you covered with world-class service before, during and after the sale. Whether you need help finding a part for your application, have a custom request, need a metallurgical analysis or need any other technical assistance, we are here to help. Our talented and accessible team of design engineers and technical service engineers are ready to offer support because your time is too valuable to spend trying to find answers on your own.

Our innovative engineering improves the function of your Hitachi® Excavator

We are here to provide quality replacement solutions for all your excavator parts needs. Backed by in-depth industry experience, our spare parts are uniquely designed to get your equipment running quickly and keep it operating longer.

Segmented tumbler

Our segmented drive tumblers can be installed and removed without taking out the drive shaft to make maintenance safer and faster. We create the drive lug to provide engagement for deeper contact with the track shoe drive lug. As with our standard drive tumbler, we have performed an induction hardening process to the wear surfaces so they hold up better against the stress of use.


Overpitch tumbler

As the drive track wears and the pitch is extended, the engagement between your track shoe drive lugs and tumbler becomes mismatched. This misalignment causes unnecessary wear to both the tumbler and track shoes, costing you time and money.


Our overpitch tumbler is makes up for the extended pitch to get the same correct engagement that you had when the drive track was new. This simple replacement does not require any modifications, and it increases your track shoe lifespan by 50% so you can drive farther between maintenance shutdowns. Segmented overpitch tumblers are available for easier replacement.

Undercarriage system

The existing OEM undercarriage of your excavator can benefit from using our individual replacement parts as the original parts wear. However, for maximum performance and the longest wear life possible, we also provide complete undercarriage system replacements. Our undercarriage system is ready to install without any modifications to the frame.

Track shoes
Track shoes bear an extreme weight load, so we make ours stronger than conventional track shoes. We use only the highest quality materials because they last longer. When your track shoes can better support your equipment, you can go further between maintenance shutdowns. Our standard track shoes are made with high quality manganese steel. We also have heavy duty and custom alloy metallurgical options available to meet the specific demands of your mine.


Lower and upper rollers
Unlike conventional rollers, we forge the body of our rollers from a single piece of steel and then put them through a unique induction hardening process, eliminating welded-joint fracture as a failure mode. We complete the rollers with our premium bronze bushings and mechanical face seals. The finished product is one that is engineered for maximum strength.


Our induction hardened idlers are stronger and last longer than conventional idlers. Every idler is made with precision using our premium bronze bushings and mechanical face seals.


Premium bronze bushings
Simply the best! A bushing may seem like a simple part, but we have earned our reputation for superior bronze bushings because of our innovative manufacturing process and dedication to providing the highest quality components. Our Quality Assurance Department scrutinizes every dimension with exacting tolerances to be sure your bushing is perfect in every way, giving your operation an unbelievable value. Less expensive than the OEM, with the highest quality in the business. We stake our reputation on our bronze components.



Expert control for high pressure grinding rolls (HPGR) improves productivity for South American copper miner

Read Story

The new F-Series HPGR is a successful prospect for Ivrindi Gold

Read Story

Stories from FLSmidth