Key Benefits

  • High performance
  • Safer and easier maintenance
  • Long service life
  • Lower energy consumption

Your high-performance, easy-maintenance mining jaw crusher

Our Jaw Crusher EB series with its standard and Pro series delivers a consistent product at maximum throughput. But it’s not just about the daily grind – we also offer long service life, with low and easy maintenance that keeps downtime to a minimum. This rock jaw crusher makes crushing hard rock and ore look easy.

Unmatched robustness and longevity

Incorporating the latest technology, the Jaw Crusher EB series consisting of a standard model range and Pro series delivers high performance thanks to the optimised geometry of the crushing chamber. With a good intake angle and aggressive stroke, you get high throughput rates with maximum crushing efficiency.

Jaw Crusher EB series

One of the key strengths of the Jaw Crusher EB series is its unmatched robustness and longevity. More efficient utilisation of the crushing chamber results in lower and more uniform wear of the crushing tools. Furthermore, the crusher frame and swing jaw are made of high-grade steel or special cast steel that has been subjected to a stress- relieving heat treatment in order to prevent residual stresses from the welding or casting process.

Jaw Crusher EB Pro series

With continuous developments and new calculation methods from bionics, we’ve been able to make our latest generation of jaw crushers particularly compact and robust. Thanks to its modular and maintenance-friendly design, our Jaw Crusher EB Pro series is ideally suited for use in both underground and opencast applications, when processing even the hardest materials.

The Jaw Crusher EB series delivers the ultimate in primary crushing efficiency, and therefore lower operating costs. It achieves this through a combination of optimum speed and generously dimensioned flywheels, which allows the crusher to achieve consistently high throughputs, reducing power peaks and energy costs. At the same time, load-carrying components such as bearings and wear elements are less stressed, which increases the service life and durability of the parts by more than 10%.

 

The standard hydraulically assisted gap adjustment can be converted to a fully hydraulic gap adjustment in the Pro Version without much effort, resulting in a reduction of service times to a minimum.

 

Our Jaw Crusher EB Pro also offers you unmatched durability and wear-resistance. With innovative design choices based on bionics, FLS can guarantee you higher service life and reduced services times. For example, the patented swing jaw and front wall design absorb load peaks during operations.

 

In our Pro series, we offer the following models (see more details below)

  • Jaw Crusher EB 20-15 Pro with a capacity range of 600 – 1,600 tph
  • Jaw Crusher EB 16-12 Pro with a capacity range of 400 – 1,200 tph
  • Jaw Crusher EB 14-11 Pro with a capacity range of 300 – 950 tph

High-performance jaw crushing with great energy saving potential

With our EB series, you benefit from a crushing solution that has high performance and durability in its DNA. We designed every bit of this mining jaw crusher to deliver you unmatched performance – such as the enhanced kinematics of the swing jaw with a high stroke in the feed and discharge area, which guarantee you very high throughput rates. However, these are just a few of many benefits of our Jaw Crusher EB.

10%
higher throughput rates
10%
longer service life of bearing and wear parts
25%
lower energy cost compared to the competitors in the market

Our Jaw Crusher EB series offers you the following benefits: 

High performance

With the Jaw Crusher EB series, you benefit of the highest performance, which leads to 10% higher throughput rates thanks the optimised nip angle and increased stroke compared with the benchmark.

Safer and easier maintenance

Our Jaw Crusher EB offers you a significant increase in service life. For example, the reinforced front and back wall as well as swing jaws made of heavy-duty materials increase the robustness of your crusher making it less prone to wear. You also benefit from 10% longer service life of bearings and wear parts thanks to the optimised geometry of the crushing chamber as well as the crusher’s nip angle and speed.

Longer service life

Thanks to the optimised crusher speed and generously dimensioned fly wheels our Jaw Crusher EB series accounts for 25% lower energy cost compared to the competitors in the market. 

Lower energy consumption
  • Reinforced front and back wall  
  • Additional outer reinforcing ribs to coincide with the lines of force 
  • Swing jaws made of heavy-duty materials 
  • Crushing jaws made of high-grade austenitic manganese steel 
  • Cheek plates made of high-strength special steel


In addition to the benefits of the standard series, the Jaw Crusher EB Pro version offers added advantages with it's unique design - allowing easier operation and maintenance.

Effective operation

Our Jaw Crusher EB Pro enables you to set and adjust the specifications for the desired product quality faster and easier thanks to the stepless standard gap adjustment system and the simple upgrade to fully hydraulic gap adjustment. The effective control and diagnosis system allows for further effectiveness in operations as it enables you to detect potential wear earlier, which gifts you an advantage in planning maintenance works.

 

Easy transport and installation

The bolted, modular crusher housing simplifies transport, assembly and maintenance. The patented screw connections allow for easy and sustainable service work.

 

Durable main components

Essential main components, such as housing parts and swing jaw, have been designed using new methods drawing on bionics. The patented solution of the swing jaw and front wall increases their service life and improves the absorption of load peaks during the crushing process.

 

Maintenance-optimised wear elements

All wear elements are optimised for fast and reliable maintenance, reducing service times by up to 20%. The freely expandable crushing jaws reduce stress transfers to other components. The eccentric shaft bearing arrangement is robust and easy to maintain. All bearings are easily installable and removed using sleeves.

Jaw Crusher EB standard and Pro series – for the hardest materials and highest durability

Unmatched robustness and longevity

Jaw Crusher EB Pro features that make your operations easier and more reliable:

A - Motor has easy access for maintenance

B - Flywheels 

C - Integrated hood

D -Patented screw connections for easy and sustainable service work

E - Special shoes for easy and reliable installation on foundation or in the steel structure

We offer the following models within our Jaw Crusher EB Pro series:

Single-toggle Jaw Crusher EB20-15 Pro
Feed grain size 0 – 1200 mm
Product size 0 – 200 mm / 0 – 300 mm
Capacity up to 700 tph with 0 – 200 mm product size
  up to 1600 tph with 0 – 300 mm product size  
Single-toggle Jaw Crusher EB16-12 Pro
Feed grain size             0 – 1000mm
Product size     0 – 200 mm / 0 – 300 mm
Capacity up to 600 tph with 0 – 200 mm product size
  up to 1200 tph with 0 – 300 mm product size
Single-toggle Jaw Crusher EB14-11 Pro
Feed grain size 0 – 900 mm
Product size 0 – 200mm / 0 – 300 mm
Capacity up to 400 tph with 0 – 200 mm product size
  up to 950 tph with 0 – 300 mm product size

 

 

Within our Jaw Crusher EB standard series, we offer the following models. They can be used as stationary crushers or they can be integrated into wheel-mounted or track-mounted mobile crushing plants.

 

Single-toggle Jaw Crusher EB 12-10
Feed grain size            0 – 800 mm
Product size 0 – 200 mm / 0 – 300 mm
Capacity up to 355 tph with 0 – 200 mm product size
  up to 540 tph with 0 – 300 mm product size
Single-toggle Jaw Crusher EB 11-08
Feed grain size 0 – 650 mm
Product size 0 – 200 mm / 0 – 300 mm
Capacity up to 300 tph with 0 – 200 mm product size
  up to 450 tph with 0 – 300 mm product size
Single-toggle Jaw Crusher EB 09-07 
Feed grain size 0 – 550 mm
Product size 0 – 130 mm / 0 – 250 mm
Capacity up to 160 tph with 0 – 130 mm product size
  up to 300 tph with 0 – 250 mm product size

Datasheets

Feedwell upgrade cuts flocculant consumption and water lost to tailings

Read Story

Thickener evolution: a testament to customer commitment

Read Story


Stories from FLSmidth