Alloy & Specialty Cyclones

FLSmidth Krebs can provide hydrocyclones to meet almost any application

Krebs Alloy and Specialty cyclones
  • Available Models
  • Need a quote or more information?
  • Contact us
  • More Krebs Products

XZ Cyclones are relatively inexpensive hydrocyclones with steel housings and replaceable elastomer liners are available. The liners can be gum rubber, neoprene, chlorobutyl, EPDM and nitrile. The hydrocyclones are designed so the liners seal the hydrocyclone and ensure that no slurry touches the housings. The liners are also spark tested to ensure that there are no pin holes.

Cast Metal Hydrocyclones are available in 0.5", 1.0", 2.0", 4.0", 6.0", and 10.0" diameters. These hydrocyclones are unlined and can be cast in any metal. These hydrocyclones cannot be built to ASME code specifications.

Fabricated Metal Hydrocyclones are also available. These hydrocyclones can be designed, built and stamped in accordance to ASME pressure vessel code, section VIII, division I. The hydrocyclones can be designed to any pressure and temperature.

Small Diameter Hydrocyclones are required for very fine separations. The small hydrocyclones are limited on capacity so a large number of these might have to be manifolded together. The 1.0", 2.0" and 3.0" diameter hydrocyclones can be manifolded together in close pack type vessels. The center section of the canister is the feed chamber which also contains the hydrocyclones. The overflows and underflows discharge into separate chambers. The vessels can be designed to ASME pressure vessel code specifications.

View more Krebs products: hydrocyclones, pumps or valves

Contact Us for Information or Quote

Please click the link and a Sales Representative will get back to you as soon as possible.
KREBS Inquiry Form

FLSmidth Krebs, Inc.  (Main Office)
5505 W. Gillette Rd.
Tucson, AZ 85743-9501 U.S.A.

Email: KREBS@flsmidth.com
Phone: +1-520-744-8200
Fax: +1-520-744-8300

Global Contact List

millMAXTM Pumps 

Add a millMAXTM pump to your separation process and watch your pumping costs drop.  As a leader in cyclones technology, we make sure your pumping system optimizes your separation requirements.

KREBS gMAXTM Hydrocyclones     

Optimum cyclone performance relies on minimizing turbulence while maximizing tangential velocity. Krebs primary focus is proper design, selection and application of hydrocyclone systems to provide the best product to our customers.

TechnequipTM Valves 

The Technequip knife gate valve is a true bi-directional slurry knife gate valve. It's massive rubber sleeves were designed to seal and withstand the harsh abrasive duty inherent in mining and milling facilities.